IAUE High Feed U-Type Aluminum End Mill- 3 Flutes

Product Number：IAUE

█Features: ①HIGH PERFORMANCE FOR HARD MATERIALS - Cutter is made of Micro Grain Carbide that is very tough, resists wear and offers high cutting performance ②HIGH-QUALITY - Flutes ground by a world-class ISO-9001 Factory █Application: Copper Alloy / Aluminum / Plastic / Wood

Add Inquiry

Features Specification Buy Now Contact Us

Features
- Special U-Type design:
Material removal rate (MRR) and surface finishes are greatly improved due to effective chip removal at high rate.
- Strong tooth with double relief angles:
Excellent production rates become 100% possible due to the improvement of tooth hardness.
- Sharp aluminum alloy tooth design. Applicable for roughing and finishing.
Customer Reviews

Excellent! ⭐⭐⭐⭐⭐
Item Package Quantity: 5 | Size:1/4 in
"These aluminum cutter look great! I am so pleased with everything I have bought from Speed Tiger, they are starting to become my favorite tool company. Everything I have gone with has been a very good value. If they had a Fusion360 tool library, they would be the perfect cutter supply. Keep up the good work!"
-----Amazon Customer from United States on December 14, 2023

Great for aluminum ⭐⭐⭐⭐⭐
Item Package Quantity: 5 | Size:3/8 in
"I used this cutter the other day in the fabrication of a fixture for a large air compressor piston refurbishment, I used it in a helix in cutting motion to pocket out some holes for the fasteners, it does a great job of clearing the chips and leaves a mirror like finish....be careful handling these cutters, they are sharpened like razor blades with a high polish finish on them."
-----Eric Sandberg from United States on August 4, 2023

Mirror like surface finish ⭐⭐⭐⭐⭐
Item Package Quantity: 5 | Size:3/8 in
"I purchased this Speed Tiger IAUE for a finishing mill and it did not disappoint !! It leaves the best edge finish on aluminum our of all mills that I have tried to date (and that's a lot). This thing leaves a mirror-like finish. These are results that you would usually only expect out of high-end CNC milling machines. I did this with a CNC router !! Now granted, it's a higher end and rigid router (ShopSabre), but still nowhere near as rigid as a mill. The Speed Tiger IAUE will perform as advertised, but I am personally using a LakeShore Carbide TAS as my rougher and the ST IAUE as a finishing mill. I originally purchased the 3/8 but I now own the entire set with backups. Highly recommend this mill for aluminum work !!"
-----Mrs S Bryl from United States on July 3, 2022

Outstanding speeds and feeds, cut my production time in half. ⭐⭐⭐⭐⭐
Item Package Quantity: 5 | Size:1/8 in
"Cutting parts in 6061 t-6, and compared to the Tormach endmills I was using, these let me run twice as fast on my feeds, with more depth of cut. Really happy with the finish they produce, and they sound a lot better, too. Review is for the 1/8" three flute uncoated high feed square endmills specifically made for aluminum."
-----Arslonga from United States on March 9, 2022

MODE	Diameter	Flute Length	Full Length	Shank Diameter	Flutes	Specification Download
IAUE1/8"3	1/8''	3/8''	1-1/2''	1/8''	3	Download Cutting Condition Download
IAUE3/16"3	3/16''	9/16''	2''	3/16''	3
IAUE1/4"3	1/4''	3/4''	2''	1/4''	3
IAUE5/16"3	5/16''	5/8''	2-1/2''	5/16''	3
IAUE3/8"3	3/8''	1-1/4''	2-1/2''	3/8''	3
IAUE1/2"3	1/2''	1-1/4''	3''	1/2''	3
AUE5/8"3	5/8''	1-5/8''	3-1/2''	5/8''	3

● Headquarters
TEL : +886-4-2350-3022
FAX : +886-4-2350-3083
Mail : sale@speedtigertools.com
Address: No.10, Jingke 2nd Rd., Nantun Dist., Taichung 40852, Taiwan

Worldwide Sales Network

● Social Media