DOCUMENT
Category
-
2024_New Value Catalogue
Declaration of New Value 2024
Download Link:
https://www.speedtigertools.com/download/index.php?index_id=428 -
NEW!! Speed Tiger General Catalogue
NEW General Catalogue of Carbide End Mills and Shrink Fit System
https://drive.google.com/file/d/1sg31qczKIUcrlQwqC5DGIlkgRz5LDr8p/view?usp=drive_link -
NEW!! Carbide Drills Catalogue
Including High Performance/ for Stainless Steel / for Aluminum Alloy/ for High Hardness Steel/ Flat Drill/ Position Drill/ Remer
http://www.speedtiger.com.tw/upload/download_files/49557bba8b321cba210d569d0ccbac41.pdf -
ST-3500 Induction Machine
ST-3500 Induction Machine
Download: http://www.speedtiger.com.tw/upload/download_files/f348f8994d4c60325b15d12e3dde8fb5.pdf -
General Catalogue (Metric)
General Catalogue of End Mills
-
400PLUS Unequal Flute Sapcing & Helix Series
400PLUS Unequal Flute Sapcing & Helix Series
Download Link: http://www.speedtiger.com.tw/upload/download_files/7fe8c4798420a872a1013ea1b1c6e89f.pdf -
High Efficient Cutting System
Power Tips Series, Dual End Carbide Anti-Vibration Shrink Fit System, Shrink Fit Chucks、
SGER Power ER Collet Chucks、ER Collet Chucks, Extension, and Accessories. -
General Catalogue (Fractional)
400PLUS, 600Nano
-
CN Insert (Double-sided / 2 edge)
1. High accuracy insert which is suitable for middle finishing and finishing.
2. 4 times use - The double-sided 2-edge design make it a cost-efficient solution.
3. Nano composite; the oxidation temperature of nACro coating is up to 1,100degree
4. Nano composite, super high hardness SH coating -
HN Insert (Double-sided / multi-edge)
The double-sided multi-edge design make it a cost-efficient solution – 12 times use.
1. Special cutting edge geometries with a high cutting performance to cast iron.
2. Circular arc design of corner is to maximize cutting edge, and improve tool life effectively
3. Nano composite; the oxidation temperature of nACro coating is up to 1,100 degree
4. Nano composite, super high hardness SH coating -
WR Insert
1. Class H high accuracy
2. New ultra-toughened carbide UF1025
3. NANO composite, super hard hardness SH coating
4. S-Shaped design lower cutting resistance -
RD Insert
1. Class E, H high accuracy
2. New ultra-toughened carbide UF1025
3. NANO composite, super hard hardness SH coating
4. NEW launch: RDH Insert for Aluminum -
600 PLUS Series (Metric)
High Efficient Series for General Application
-
Inset General Catalogue
Milling and Turning.