-
600PLUS - General Series
Diameter: 0.2mm~32mm
Type: Square, Ball Nose, Corner Radius, Miniature, Long Flute, Finishing, Roughing, Long Neck, Long Shank, Taper Flute, Pencil Neck.
Coating: ALTIBN, TiSiN, ZrN-A -
400PLUS - High Efficient General Series
Type: Miniature Square, Square Type Short Flute, Square Type Medium Flute, Square, Long Flute Square, Square Type Heavy Duty, Multiple Flutes Square, Multiple Flutes Long Flute Square, Long Neck Square, Miniature Ball Nose, Ball Nose, Long Shank Ball Nose, Ball Nose Type Long Flute & Neck, Power Short Flute Ball Nose, Long Shank Ball Nose, Long Neck Ball Nose, Pencil Neck Ball Nose, Pencil Long Neck Ball Nose, Corner Radius, Pencil Neck Corner Radius, Long Neck Corner Radius Nose.
Working Materials: Carbon Steel, Alloy Steel, Pre-hardened steel under 60HRC, Stainless steel, Titanium alloy, Cooper alloy, Aluminum alloy.
Coating:ALTIBN, nACRo, ZrN-S -
DE - Slotting Side Milling (Soft material)
Square Type, good at Slotting and Side Milling (Soft material)
Coating: TiSiN, ZrN-A, nACRo
Diameter: 1mm~20mm -
DH+ - Slotting Milling Reinforcement (Hard material)
Square Type, good at Slotting Milling Reinforcement (Hard material)
Coating：nACRo, ZrN-A
Diameter: 3mm~20mm -
-
Inconel Alloy Series
Working Materials: Inconel718, 718PLUS
Coating: ZrN-A(Zirconia + AlTiBN)
Type: Square, Corner Radius -
600PLUS with TiSiN coating - Economy Series
Type: Square, Ball Nose, Corner Radius, Miniature, Long Flute, Finishing, Roughing, Long Neck, Long Shank, Taper Flute, Pencil Neck.
Coating: TiSiN
Diameter: 0.2mm~32mm -
200PLUS - High Hardness Exotic Materials
Type: Miniature, Square, Long Flute, Multiple Flutes, Long Neck, Long Shank, Ball Nose, Power Short Flute Ball Nose, Corner Radius, Pencil Neck.
Coating: TiSiN+, P-nACo -
600PLUS with ALTIBN coating - Economy Series
Type: Square, Ball Nose, Corner Radius, Miniature, Long Flute, Long Neck, Long Shank, Taper Flute, Pencil Neck
Coating：ALTIBN -
-
P-SFULVT Long Flute Square End Mill - 6 Fultes
200 PLUS Nano End Mills，Diameter：6mm~25mm，Coating：TiSiN+/ P-nACo
-
P-SFULVT Long Flute Square End Mill - 8 Fultes
200 PLUS Nano End Mills，Diameter：6mm~25mm，Coating：TiSiN+/ P-nACo
-
P-SFULBT Long Shank Ball Nose Type - 2Flutes
200 PLUS Nano，Diameter：1mm~25mm，Coating：TiSiN+/ P-nACo
-
-
JAE Square End Mill for Non-Ferrous - 2 & 3 Flutes
Oil Jet End Mills Series，Diameter：6mm~20mm，Coating：uncoated
-
JANT Roughing & Fine Pitch Roughing End Mill - 3 Flutes
Oil Jet End Mills Series，Diameter：6mm~20mm，Coating：uncoated
-
JNTA Roughing & Fine Pitch Roughing End Mill - 3 & 4 Flutes
Oil Jet End Mills Series，Diameter：6mm~20mm，Coating：RS
-
JXTA Roughing & Fine Pitch Roughing End Mill - 3 & 4 Flutes
Oil Jet End Mills Series，Diameter：6mm~20mm，Coating：RS
-
-
-
FHPS Short Flute Square End Mill - 4 Flutes
FHP Heavy Duty End Mills Series，Diameter：2mm~20mm，Coating：nBS
-
FHP+ Series - Heavy Duty
Type: Square, Ball Nose, Corner Radius
Diameter：6mm~25mm
Coating：nACRo -
FHPM / FHPL Long Flute Square End Mill - 4 Flutes
FHP Heavy Duty End Mills Series，Diameter：3mm~20mm，Coating：nBS
-
HPSS Series - High Speed Plugging & Slotting & Side Milling
Type: Square
Diameter：2mm~20mm
Coating：SS -
KK Multi Flutes High Efficiency End Mills
Multi Flutes High Efficiency End Mills Series,
Diameter：6mm~25mm
Coating：nACo -
-
BFR Double Removal Rate-Corner Radius End Mill - 2 Flutes
BFR Double Removal Rate End Mills Series, Diameter：6mm~16mm, Coating：SH
-
CDM Multi-function End Mill - 2 Flutes
600Nano End Mills Series, Diameter：3mm~20mm，Coating：AlTiN
-
-
KK Series - High Speed Plugging + Slotting + Side milling
Type: Roughing & Finishing Type
Coating: P-nACo, TiSiN, nACRo -
KCR Corner Radius End Mill - 4 Flutes
SH Super High Hardness & Speed Cutting End Mills Series, Diameter：2mm~12mm, Coating：SH
-
General Series for Non-Ferrous
Type: Square, Roughing, Ball Nose, Long Neck Ball Nose
Coating：TB (DLC) Coating -
SUS+ Series - Anti-Vibration
Working Materials: SUS 303/314/304
Coating: ZrN-A
Diameter：3mm~20mm -
-
400PLUS - Wear resistance, with ZrN-S, nACRo Coating
Working Materials: Stainless steel 316/316L/430/17-4, Titanium alloy, Carbon Steel, Alloy Steel, Pre-hardened steel under 60HRC.
Coating: ALTIBN, nACRo, ZrN-S
Cooling Way: Water coolant -
600PLUS - Economy Series, with ZrN-A coating
Working Materials: Stainless steel 303/314/304, Carbon Steel, Alloy Steel, Pre-hardened steel under 45HRC.
Coating: ZrN-A
Cooling Way: Air Cutting, Dry Cutting -
Titanium Nickel Alloy
Working Materials: Ti6Al4V
Coating: ALTIBN, ZrN-S, nACRo(Recommend)
Type: Square, Ball Nose, Corner Radius -
AeroSpace High Speed Series for Aluminum
Type: Square, Ball Nose, Corner Radius
Diameter：2mm~20mm -
