-
600PLUS - General Series
Diameter: 0.2mm~32mm
Type: Square, Ball Nose, Corner Radius, Miniature, Long Flute, Finishing, Roughing, Long Neck, Long Shank, Taper Flute, Pencil Neck.
Coating: ALTIBN, TiSiN, ZrN-A -
Thread Mill Cutter ISO 2D
Thread Diameter: M3~M24
Thread Length: 2 x Thread Diameter
TM - ISO R262 (DIN13) / 6H -
Thread Mill Cutter ISO 2D Coolant
Thread Diameter: M6~M24
Thread Length: 2 x Thread Diameter
TM - ISO R262 (DIN13) / 6H -
Thread Mill Cutter ISO 1.5D (Effective Length)
Thread Diameter: M3~M16
Thread Length: 1.5 x Thread Diameter
With Effective Length // TM - ISO R262 (DIN13) / 6H -
Thread Mill Cutter ISO 1.5D (Effective Length) Coolant
Thread Diameter: M6~M16
Thread Length: 1.5 x Thread Diameter
With Effective Length // TM - ISO R262 (DIN13) / 6H -
Thread Mill Cutter ISO 1.5D/2D/2.5D Chamfer
Thread Diameter: M3~M12
Thread Length: 1.5~2.5 x Thread Diameter
TM - ISO R262 (DIN13) / 6H -
Thread Mill Cutter ISO 1.5D/2D/2.5D Chamfer Coolant
Thread Diameter: M5~M12
Thread Length: 1.5~2.5 x Thread Diameter
TM - ISO R262 (DIN13) / 6H -
3 Pitch Thread Mill Cutter ISO
Thread Diameter: M1.6~M12
Thread Length: 1.5 ~ 5.25 mm
With Effective Length // TM - ISO R262 (DIN13) / 6H -
1 Pitch Miniature Thread Mill Cutter ISO
Thread Diameter: M1~M3
Thread Length: 1.5 ~ 5.25 mm
With Effective Length // TM - ISO R262 (DIN13) / 6H -
-
-
Full Profile Thread Mill Cutter ISO
Customized for variety of materials.
Coating Options : Uncoat / nACRo / ZrN-A / nACo -
-
-
-
ISEUD Carbide Spiral CNC Router Bits - Up Down Compression Bit
Diameter: 1/4", 3/8", 1/2"
Type: Up Down Compression Bit -
ICARVE Carving CNC Router Bit Set - Engraving
Diameter: 1/4"
60° V Groove
90° V Groove
15° Detail Carving Liner
20° Flat Tip Profile Bit -
IAP Carbide Spiral CNC Router Bits - O Flute
Diameter: 1/8", 3/16", 1/4", 5/16", 3/8", 1/2"
Type: O Flute -
INTA Carbide Spiral CNC Router Bits - Rougher
Diameter: 1/4", 5/16",3/8", 1/2", 5/8"
Type: Rougher -
ISEU-FT Carbide Spiral CNC Router Bits - Flush Trim Bit - Up Cut
Diameter: 1/4"
Type: Flush Trim Bit - Up Cut -
ISED-FT Carbide Spiral CNC Router Bits - Flush Trim Bit - Down Cut
Diameter: 1/4"
Type: Flush Trim Bit - Down Cut -
-
-
-
-
FG/FGR Face Grooving / Face Grooving Radius
Face Grooving Diameter：Ø4.0mm~Ø8.0mm
Face Grooving Radius：Ø4.0mm~Ø6.0mm
Coating: TiSiN -
-
-
Carbide Spiral CNC Router Bits - Ball Nose Type
Diameter: 1/16",5/64",3/32",7/64",1/8" ,3/16",1/4",5/16", 3/8", 1/2",5/8"
Type: Ball Nose Type -
-
400PLUS - High Efficient General Series
Type: Miniature Square, Square Type Short Flute, Square Type Medium Flute, Square, Long Flute Square, Square Type Heavy Duty, Multiple Flutes Square, Multiple Flutes Long Flute Square, Long Neck Square, Miniature Ball Nose, Ball Nose, Long Shank Ball Nose, Ball Nose Type Long Flute & Neck, Power Short Flute Ball Nose, Long Shank Ball Nose, Long Neck Ball Nose, Pencil Neck Ball Nose, Pencil Long Neck Ball Nose, Corner Radius, Pencil Neck Corner Radius, Long Neck Corner Radius Nose.
Working Materials: Carbon Steel, Alloy Steel, Pre-hardened steel under 60HRC, Stainless steel, Titanium alloy, Cooper alloy, Aluminum alloy.
Coating:ALTIBN, nACRo, ZrN-S -
Promotional Set - P-MSB 2Flutes/4Flutes
Type：35° Helix Angle Ball Nose Type
Sizes：ø 1, 1.5, 2, 3, 4mm /10pcs, total 50pcs in one box.
Coating：Uncoated / ALTIBN / TiSiN / ZrN-A -
Promotional Set - P-SB 2Flutes/4Flutes
Type：35° Helix Angle Ball Nose Type
Sizes：ø 6, 8, 10, 12mm /1pc, total 4pcs in one box.
Coating：Uncoated / ALTIBN / TiSiN / ZrN-A -
Amazon Best Seller - ISB 2FLUTES
600Nano End Mills General Application, Diameter：1/16"~5/8", Coating：ALTIBN
-
ISE Square End Mill - 4 Flutes
600Nano End Mills General Application, Diameter：1/16"~5/8", Coating：ALTIBN
-
Amazon Best Seller -Go Green with SPEED TIGER
Type : Square End Mills
Coating: ALTIBN
Diameter：1/4" -
Promotional Set - P-SE 2Flutes/4Flutes
Type：35° Helix Angle Square End Mills
Sizes：ø 6, 8, 10, 12mm /1pc, total 4pcs in one box.
Coating：Uncoated / ALTIBN / TiSiN / ZrN-A -
Promotional Set - P-PE 3Flutes/4Flutes
Type：45° Helix Angle Square End Mills
Sizes：ø 6, 8, 10, 12mm /1pc, total 4pcs in one box.
Coating：Uncoated / ALTIBN / TiSiN / ZrN-A -
Promotional Set - P-MSE 2Flutes/4Flutes
Type：35° Helix Angle Square End Mills
Sizes：ø 1, 1.5, 2, 3, 4mm /10pcs, total 50pcs in one box.
Coating：Uncoated / ALTIBN / TiSiN / ZrN-A -
Promotional Set - P-MPE 3Flutes/4Flutes
Type：45° Helix Angle Square End Mills
Sizes：ø 1, 1.5, 2, 3, 4mm /10pcs, total 50pcs in one box.
Coating：ALTIBN / TiSiN / ZrN-A -
Promotional Set - P-XTA 3Flutes/4Flutes
Type：25° Helix Angle Square End Mills
Sizes：ø 6, 8, 10, 12mm /1pc, total 4pcs in one box.
Coating：ALTIBN / TiSiN / ZrN-A -
FHP+ Series - Heavy Duty
Type: Square, Ball Nose, Corner Radius
Diameter：6mm~25mm
Coating：nACRo -
DE - Slotting Side Milling (Soft material)
Square Type, good at Slotting and Side Milling (Soft material)
Coating: TiSiN, ZrN-A, nACRo
Diameter: 1mm~20mm -
DH+ - Slotting Milling Reinforcement (Hard material)
Square Type, good at Slotting Milling Reinforcement (Hard material)
Coating：nACRo, ZrN-A
Diameter: 3mm~20mm -
-
Square End Mill (45°) - 3 Flutes - P-MPE/P-PE
Application: ~50HRC / Iron, Carbon steel, Cast Iron, Alloy Steel, Tool Steel, Heat treatment Steel, Welding Steel.
Diameter：1mm~20mm // P-MPE/P-PE
Coating：Uncoated / ALTIBN / TiSiN / ZrN-A(Zirconia + AlTiBN) -
Square End Mill (35°) - 4 Flutes - P-SSE/P-MSE/P-SE
Application: ~50HRC / Iron, Carbon steel, Cast Iron, Alloy Steel, Tool Steel, Heat treatment Steel, Welding Steel.
Diameter：1mm~20mm // P-SSE/P-MSE/P-SE
Coating：Uncoated / ALTIBN / TiSiN / ZrN-A(Zirconia + AlTiBN) -
Square End Mill (45°) - 4 Flutes - P-MPE/P-PE
Application: ~50HRC / Iron, Carbon steel, Cast Iron, Alloy Steel, Tool Steel, Heat treatment Steel, Welding Steel.
Diameter：1mm~20mm // P-MPE/P-PE
Coating：Uncoated / ALTIBN / TiSiN / ZrN-A(Zirconia + AlTiBN) -
Long Flute Square End Mill - 4 Flutes - P-LET
Application: ~50HRC / Iron, Carbon steel, Cast Iron, Alloy Steel, Tool Steel, Heat treatment Steel, Welding Steel.
Diameter：1mm~20mm // P-LET
Coating：Uncoated / ALTIBN / TiSiN / ZrN-A(Zirconia + AlTiBN) -
Ball Nose End Mill - 2 Flutes -P-SSB/P-MSB/P-SB
Application: ~50HRC / Iron, Carbon steel, Cast Iron, Alloy Steel, Tool Steel, Heat treatment Steel, Welding Steel.
Diameter：1mm~20mm // P-SSB/P-MSB/P-SB
Coating：Uncoated / ALTIBN / TiSiN / ZrN-A(Zirconia + AlTiBN) -
Long Neck Ball Nose End Mill - 2 Flutes - P-LNBT
Application: ~50HRC / Iron, Carbon steel, Cast Iron, Alloy Steel, Tool Steel, Heat treatment Steel, Welding Steel.
Diameter：0.5mm~1.6mm // P-LNBT
Coating：Uncoated / ALTIBN / TiSiN / ZrN-A(Zirconia + AlTiBN) -
Ball Nose End Mill - 4 Flutes - P-SSB/P-MSB/P-SB
Application: ~50HRC / Iron, Carbon steel, Cast Iron, Alloy Steel, Tool Steel, Heat treatment Steel, Welding Steel.
Diameter：1mm~20mm // P-SSB/P-MSB/P-SB
Coating：Uncoated / ALTIBN / TiSiN / ZrN-A(Zirconia + AlTiBN) -
P-RTA Corner Radius End Mill - 2 Flutes
Application: ~50HRC / Iron, Carbon steel, Cast Iron, Alloy Steel, Tool Steel, Heat treatment Steel, Welding Steel.
Diameter：1mm~12mm
Coating：Uncoated / ALTIBN / TiSiN / ZrN-A(Zirconia + AlTiBN) -
P-LRTA Long Shank Corner Radius End Mill - 2 Flutes
Application: ~50HRC / Iron, Carbon steel, Cast Iron, Alloy Steel, Tool Steel, Heat treatment Steel, Welding Steel.
Diameter：3mm~12mm
Coating： ALTIBN / TiSiN / ZrN-A(Zirconia + AlTiBN) -
P-RTA Corner Radius End Mill - 4 Flutes
Application: ~50HRC / Iron, Carbon steel, Cast Iron, Alloy Steel, Tool Steel, Heat treatment Steel, Welding Steel.
Diameter：2mm~12mm
Coating：Uncoated / ALTIBN / TiSiN / ZrN-A(Zirconia + AlTiBN) -
Long Shank Corner Radius End Mill - 4 Flutes - P-LRTA
Application: ~50HRC / Iron, Carbon steel, Cast Iron, Alloy Steel, Tool Steel, Heat treatment Steel, Welding Steel.
Diameter：3mm~12mm // P-LRTA
Coating： ALTIBN / TiSiN / ZrN-A(Zirconia + AlTiBN) -
Miniature Square End Mill - 2 Flutes - P-MIE
Application: ~50HRC/Iron, Carbon steel, Cast Iron, Alloy Steel, Tool Steel, Heat treatment Steel, Welding Steel.
Diameter：0.2mm~3mm // P-MIE
Coating：Uncoated / ALTIBN / TiSiN / ZrN-A(Zirconia + AlTiBN) -
Long Shank Square End Mill- 2 Flutes - P-SLE/P-MLE
Application: ~45HRC/Iron, Carbon steel, Cast Iron, Alloy Steel, Tool Steel, Heat treatment Steel, Welding Steel.
Diameter：6mm~12mm // P-SLE/P-MLE
Coating：Uncoated / ALTIBN / TiSiN / ZrN-A(Zirconia + AlTiBN) -
P-LTTA Taper Long Flute Square End Mill - 2 Flutes
600 PLUS Nano End Mills Series, Diameter：1mm~6mm，Coating： ALTIBN / TiSiN / ZrN-A(Zirconia + AlTiBN)
-
Fine Pitch & Roughing End Mill - 3 Flutes - P-NTA
Application: ~45HRC/Iron, Carbon steel, Cast Iron, Alloy Steel, Tool Steel, Heat treatment Steel,Welding Steel.
Diameter：4mm~20mm // P-NTA
Coating：Uncoated / ALTIBN / TiSiN / ZrN-A(Zirconia + AlTiBN) -
Fine Pitch & Roughing End Mill - 3 Flutes - P-XTA
Application: ~45HRC/Iron, Carbon steel, Cast Iron, Alloy Steel, Tool Steel, Heat treatment Steel, Welding Steel.
Diameter：4mm~20mm //P-XTA
Coating：ALTIBN / TiSiN / ZrN-A(Zirconia + AlTiBN) -
Long Shank Square End Mill - 4 Flutes - P-SLE/P-MLE
Application: ~45HRC/Iron, Carbon steel, Cast Iron, Alloy Steel, Tool Steel, Heat treatment Steel,Welding Steel.
Diameter：6mm~12mm // P-SLE/P-MLE
Coating：Uncoated / ALTIBN / TiSiN / ZrN-A(Zirconia + AlTiBN) -
Fine Pitch & Roughing End Mill - 4 Flutes - P-NTA
Application: ~45HRC/Iron, Carbon steel, Cast Iron, Alloy Steel, Tool Steel, Heat treatment Steel,Welding Steel.
Diameter：4mm~20mm // P-NTA
Coating：Uncoated / ALTIBN / TiSiN / ZrN-A(Zirconia + AlTiBN) -
Fine Pitch & Roughing End Mill - 4 Flutes - P-XTA
Application: ~45HRC/Iron, Carbon steel, Cast Iron, Alloy Steel, Tool Steel, Heat treatment Steel,Welding Steel.
Diameter：4mm~20mm // P-XTA
Coating：ALTIBN / TiSiN / ZrN-A(Zirconia + AlTiBN) -
Miniature Ball Nose End Mill - 2 Flutes - P-MIB
Application: ~50HRC/Iron, Carbon steel, Cast Iron, Alloy Steel, Tool Steel, Heat treatment Steel,Welding Steel.
Diameter：0.3mm~3mm // P-MIB
Coating：ALTIBN / TiSiN / ZrN-A(Zirconia + AlTiBN) -
Long Shank Ball Nose End Mill - 2 Flutes - P-SLB/P-MLB/P-LLB/P-XLB
Application: ~50HRC / Iron, Carbon steel, Cast Iron, Alloy Steel, Tool Steel, Heat treatment Steel, Welding Steel.
Diameter：1mm~16mm // P-SLB/P-MLB/P-LLB/P-XLB
Coating：Uncoated / ALTIBN / TiSiN / ZrN-A(Zirconia + AlTiBN) -
P-PBTA Taper Neck Ball Nose End Mill - 2 Flutes
600 PLUS Nano End Mills Series, Diameter：1mm~8mm，Coating：ALTIBN / TiSiN / ZrN-A(Zirconia + AlTiBN)
-
P-TBTA Taper Ball Nose End Mill - 2 Flutes
600 PLUS Nano End Mills Series, Diameter：1mm~3mm，Coating： ALTIBN / TiSiN / ZrN-A(Zirconia + AlTiBN)
-
Inconel Alloy Series
Working Materials: Inconel718, 718PLUS
Coating: ZrN-A(Zirconia + AlTiBN)
Type: Square, Corner Radius -
600PLUS with TiSiN coating - Economy Series
Type: Square, Ball Nose, Corner Radius, Miniature, Long Flute, Finishing, Roughing, Long Neck, Long Shank, Taper Flute, Pencil Neck.
Coating: TiSiN
Diameter: 0.2mm~32mm -
200PLUS - High Hardness Exotic Materials
Type: Miniature, Square, Long Flute, Multiple Flutes, Long Neck, Long Shank, Ball Nose, Power Short Flute Ball Nose, Corner Radius, Pencil Neck.
Coating: TiSiN+, P-nACo -
Miniature Ball Nose End Mill - 2 Flutes - P-UMIB
Application: ~HRC60/ Iron, Carbon steel, Cast Iron, Alloy Steel, Tool Steel, Heat treatment Steel, Welding Steel
Diameter：0.3mm~3mm // P-UMIB
Coating：ALTIBN/ ZrN-S/ nACRo -
Ball Nose End Mill - 2 Flutes - P-UBT
Application: ~HRC60/ Iron, Carbon steel, Cast Iron, Alloy Steel, Tool Steel, Heat treatment Steel, Welding Steel
Diameter：1mm~25mm // P-UBT
Coating：ALTIBN/ ZrN-S/ nACRo -
P-UPBT Taper Neck Ball Nose End Mill - 2 Flutes
400 PLUS Nano End Mills，Diameter：1mm~10mm，Coating：ALTIBN/ ZrN-S/ nACRo
-
P-ULPBT Taper Long Neck Ball Nose End Mill - 2 Flutes
400 PLUS Nano End Mills，Diameter：2mm~4mm，Coating：ALTIBN/ ZrN-S/ nACRo
-
Ball Nose End Mill - 4 Flutes - P-UBT
Application: ~HRC60/ Iron, Carbon steel, Cast Iron, Alloy Steel, Tool Steel, Heat treatment Steel, Welding Steel
Diameter：1mm~16mm
Coating：ALTIBN/ ZrN-S/ nACRo -
P-UCRS Taper Neck Corner Radius End Mill - 2 Flutes
400 PLUS Nano End Mills，Diameter：1mm~12mm，Coating：ALTIBN/ ZrN-S/ nACRo
-
P-UCR Long Corner Radius Nose End Mill - 4 Flutes
400 PLUS Nano End Mills，Diameter：6mm~12mm，Coating： ALTIBN/ ZrN-S/ nACRo
-
P-UCRS Taper Neck Corner Radius End Mill - 4 Flutes
400 PLUS Nano End Mills，Diameter：2mm~12mm，Coating：ALTIBN/ ZrN-S/ nACRo
-
600PLUS with ALTIBN coating - Economy Series
Type: Square, Ball Nose, Corner Radius, Miniature, Long Flute, Long Neck, Long Shank, Taper Flute, Pencil Neck
Coating：ALTIBN -
-
P-SFULVT Long Flute Square End Mill - 6 Fultes
200 PLUS Nano End Mills，Diameter：6mm~25mm，Coating：TiSiN+/ P-nACo
-
P-SFULVT Long Flute Square End Mill - 8 Fultes
200 PLUS Nano End Mills，Diameter：6mm~25mm，Coating：TiSiN+/ P-nACo
-
Miniature Ball Nose End Mill - 2 Flutes - P-SFUMIB
Application: ~HRC65/ Iron, Carbon steel, Cast Iron, Alloy Steel, Tool Steel, Heat treatment Steel,Welding Steel
Diameter：0.3mm~3mm // P-SFUMIB
Coating：TiSiN+/ P-nACo -
High Precision Radius Accuracy Ball Nose End Mill - 2 Flutes - P-SFUBT
Application: ~HRC65/ Iron, Carbon steel, Cast Iron, Alloy Steel, Tool Steel, Heat treatment Steel,Welding Steel
Diameter：1mm~25mm // P-SFUBT
Coating：TiSiN+/ P-nACo -
Power Short Flute Ball Nose End Mill - 2 Flutes - P-SFUBTSX
Application: ~HRC65/ Iron, Carbon steel, Cast Iron, Alloy Steel, Tool Steel, Heat treatment Steel,Welding Steel
Diameter：1mm~16mm // P-SFUBTSX
Coating：TiSiN+/ P-nACo -
P-SFULBT Long Shank Ball Nose Type - 2Flutes
200 PLUS Nano，Diameter：1mm~25mm，Coating：TiSiN+/ P-nACo
-
High Precision Radius Accuracy Ball Nose End Mill - 4 Flutes - P-SFUBT
Application: ~HRC65/ Iron, Carbon steel, Cast Iron, Alloy Steel, Tool Steel, Heat treatment Steel,Welding Steel
Diameter：1mm~25mm // P-SFUBT
Coating：TiSiN+/ P-nACo -
P-SFUCRM Long Neck Long Shank Corner Radius End Mill - 2 Flutes
200 PLUS Nano End Mills，Diameter：6mm~12mm，Coating：TiSiN+/ P-nACo
-
P-SFUCR Long Neck Corner Radius End Mill - 2 Flutes
200 PLUS Nano End Mills，Diameter：0.4mm~6mm，Coating：TiSiN+/ P-nACo
-
P-SFUCRS Taper Neck Corner Radius End Mill - 2 Flutes
200 PLUS Nano End Mills，Diameter：1mm~12mm，Coating：TiSiN+/ P-nACo
-
P-SFUCRM Long Neck Long Shank Corner Radius End Mill - 4 Flutes
200 PLUS Nano End Mills，Diameter：6mm~12mm，Coating：TiSiN+/ P-nACo
-
P-SFUCRS Taper Neck Corner Radius End Mill - 4 Flutes
200 PLUS Nano End Mills，Diameter：2mm~12mm，Coating：TiSiN+/ P-nACo
-
AP Square End Mill-For Wood & Plastic & Aluminum - 1 Flute
Non-Ferrous End Mills Series，Diameter：1mm~12mm，Coating：uncoated
-
AP TB Coating Square End Mill-For Wood & Plastic & Aluminum - 1 Flute
Non-Ferrous End Mills Series，Diameter：1mm~12mm，Coating：TB
-
-
AEL5 Square End Mill - 2 Flutes
Non-Ferrous End Mills Series，Diameter：3mm~20mm，Coating：uncoated
-
AEL5 TB Coating Square End Mill - 2 Flutes
Non-Ferrous End Mills Series，Diameter：3mm~20mm，Coating：TB
-
-
CE TB Coating Square End Mill - 2 Flutes
Non-Ferrous End Mills Series，Diameter：1mm~20mm，Coating：TB
-
-
AET Specular Square End Mill - 2 Flutes
Non-Ferrous End Mills Series，Diameter：0.5mm~25mm，Coating：uncoated
-
AET TB Coating Specular Square End Mill - 2 Flutes
Non-Ferrous End Mills Series，Diameter：0.5mm~25mm，Coating：TB
-
ALET Specular Square End Mill - 2 Flutes
Non-Ferrous End Mills Series，Diameter：6mm~25mm，Coating：TB
-
-
-
AEL5 Square End Mill - 3 Flutes
Non-Ferrous End Mills Series，Diameter：3mm~20mm，Coating：uncoated
-
AET Specular Square End Mill - 3 Flutes
Non-Ferrous End Mills Series，Diameter：1mm~25mm，Coating：uncoated
-
AET TB Coating Specular Square End Mill - 3 Flutes
Non-Ferrous End Mills Series，Diameter：1mm~25mm，Coating：TB
-
ALET Specular Square End Mill - 3 Flutes
Non-Ferrous End Mills Series，Diameter：6mm~25mm，Coating：TB
-
ANT Roughing End Mill - 3 Flutes
Non-Ferrous End Mills Series，Diameter：4mm~25mm，Coating：uncoated
-
ANT TB Coating Roughing End Mill - 3 Flutes
Non-Ferrous End Mills Series，Diameter：4mm~25mm，Coating：TB
-
ACB Ball Nose End Mill - 2 Flutes
Non-Ferrous End Mills Series，Diameter：1mm~12mm，Coating：uncoated
-
ACB TB Coating Ball Nose End Mill - 2 Flutes
Non-Ferrous End Mills Series，Diameter：1mm~12mm，Coating：TB
-
AA/AAS High Speed Square End Mill series - For Aluminum - 3 Flutes
Non-Ferrous End Mills Series，Diameter：2mm~20mm，Coating：TB
-
AAL Long Neck Square End Mill - 3 Flutes
Non-Ferrous End Mills Series，Diameter：2mm~20mm，Coating：TB
-
AUE High Feed U-End Mill Aluminum - 3 Flutes
For Aluminum Series，Diameter：2.5mm~20mm，Coating：uncoated
-
AUEL High Feed U-End Mill Aluminum - 3 Flutes
Non-Ferrous End Mills Series，Diameter：6mm~12mm，Coating：uncoated
-
-
ACBL Long Neck Ball Nose End Mill - 2 Flutes
Non-Ferrous End Mills Series，Diameter：1mm~4mm，Coating：TB
-
CMF Corner Radius End Mill - 2 Flutes
Non-Ferrous End Mills Series，Diameter：2mm~20mm，Coating：TB
-
CA-AA TB Coating Corner Radius End Mill - 3 Flutes
Non-Ferrous End Mills Series，Diameter：3mm~20mm，Coating：TB
-
CR-AA TB Coating Corner Radius End Mill - 3 Flutes
Non-Ferrous End Mills Series，Diameter：3mm~20mm，Coating：TB
-
-
JAE Square End Mill for Non-Ferrous - 2 & 3 Flutes
Oil Jet End Mills Series，Diameter：6mm~20mm，Coating：uncoated
-
JANT Roughing & Fine Pitch Roughing End Mill - 3 Flutes
Oil Jet End Mills Series，Diameter：6mm~20mm，Coating：uncoated
-
JNTA Roughing & Fine Pitch Roughing End Mill - 3 & 4 Flutes
Oil Jet End Mills Series，Diameter：6mm~20mm，Coating：RS
-
JXTA Roughing & Fine Pitch Roughing End Mill - 3 & 4 Flutes
Oil Jet End Mills Series，Diameter：6mm~20mm，Coating：RS
-
-
-
FHPS Short Flute Square End Mill - 4 Flutes
FHP Heavy Duty End Mills Series，Diameter：2mm~20mm，Coating：nBS
-
FHP+ Series - Heavy Duty
Type: Square, Ball Nose, Corner Radius
Diameter：6mm~25mm
Coating：nACRo -
FHPM / FHPL Long Flute Square End Mill - 4 Flutes
FHP Heavy Duty End Mills Series，Diameter：3mm~20mm，Coating：nBS
-
HPSS Series - High Speed Plugging & Slotting & Side Milling
Type: Square
Diameter：2mm~20mm
Coating：SS -
KK Multi Flutes High Efficiency End Mills
Multi Flutes High Efficiency End Mills Series,
Diameter：6mm~25mm
Coating：nACo -
-
BFR Double Removal Rate-Corner Radius End Mill - 2 Flutes
BFR Double Removal Rate End Mills Series, Diameter：6mm~16mm, Coating：SH
-
CDM Multi-function End Mill - 2 Flutes
600Nano End Mills Series, Diameter：3mm~20mm，Coating：AlTiN
-
-
Heavy Duty Plus - CRFHPC Corner Radius End Mill - 4 Flutes
FHP+ Heavy Duty Plus End Mills Series，Diameter：6mm~25mm，Coating：nACRo
-
Multi Flutes High Efficiency End Mill
KK Multi Flutes High Efficiency End Mills Series,
Diameter：6mm~25mm // KKH
Coating：nACo -
KK Series - High Speed Plugging + Slotting + Side milling
Type: Roughing & Finishing Type
Coating: P-nACo, TiSiN, nACRo -
KTG Ball Nose End Mill - 2 Flutes
Application: ~HRC60/ Iron, Carbon steel, Cast Iron, Alloy Steel, Tool Steel, Heat treatment Steel, Welding Steel
Diameter：0.5R~6R // KTG
Coating：Super Hardness Coating - SH -
KCR Corner Radius End Mill - 4 Flutes
SH Super High Hardness & Speed Cutting End Mills Series, Diameter：2mm~12mm, Coating：SH
-
Double Removal Rate-BFR Corner Radius End Mill - 2 Flutes
BFR Double Removal Rate End Mills Series, Diameter：6mm~16mm, Coating：SH
-
High Performance S-Flute Chamfer Mill - 3 Flutes
Chamfer Angle: 90°
For General Materials Application.
3 Coatings: ALTIBN, TiSiN, ZrN-A, and Uncoat. -
High Performance S-Flute Chamfer Mill - 5 Flutes
Chamfer Angle: 90°
For Exotic Materials Application
3 Coatings: ALTIBN, TiSiN, ZrN-A. -
Multi-funtional Chamfer Mill - 2 Flutes
Chamfer Angle: 120-90°
Excel for Centering (Positioning), Chamfering, Side Milling
3 Coatings: ALTIBN, TiSiN, ZrN-A, and Uncoat. -
Multi-funtional Chamfer Mill - 4 Flutes
Chamfer Angle: 120-90°
Excel for Centering (Positioning), Chamfering, Side Milling
3 Coatings: ALTIBN, TiSiN, ZrN-A, and Uncoat. -
Straight Flute Chamfer Mill - 4 Flutes
Chamfer Angle: 60° / 90°
Excel for Chamfering, Carving, V Groove.
ZrN-A Coating. -
Spot Drill / Chamfer Mill + Inserts SET
Spot Drill / Chamfer Mill + Inserts SET, Diameter：16mm, Overall Length: 120mm, Coating：AlTiSiN+ Zirconia
-
CDM Multi-function End Mill - 2 Flutes
600Nano End Mills Series, Diameter：3mm~20mm，Coating：AlTiN
-
PDSTS Position Chamfer End Mill Cutter
Power Tips Series-Functional , Diameter：4mm~20mm, Coating：AlTiN
-
TMAS Double Chamfer End Mill Cutter
Power Tips Series-Functional , Diameter：8mm~20mm, Coating：AlTiN
-
-
PKC High Performance Carbide Drill 5xD 8xD
Point Angle: 140°
Drill Depth: 5xD / 8xD
Size Range: 3mm~14mm / 3mm~12mm -
SN Carbide Drill For Stainless Steel 3xD 5xD
Point Angle: 135°
Drill Depth: 3xD / 5xD
Size Range: 3mm~16mm / 3mm~14mm -
SNC Carbide Drill For Stainless Steel 5xD 8xD
Point Angle: 140°
Drill Depth: 5xD / 8xD
Size Range: 3mm~14mm / 3mm~12mm -
AL Carbide Drill For Aluminum Application 5xD
Point Angle: 130°
Drill Depth: 5xD
Size Range: 3mm~12mm -
ALC Carbide Drill For Aluminum Application 5xD 8xD
Point Angle: 130°
Drill Depth: 5xD / 8xD
Size Range: 3mm~12mm -
Carbide Drill Bits For High Hardness Steel
Point Angle: 140°
Drill Depth: 3xD
Size Range: 3mm~14mm -
-
FDC Flat Drill With Coolant Hole 3xD 5xD
Point Angle: 180°
Drill Depth: 3xD / 5xD
Size Range: 3mm~16mm / 3mm~14mm -
PDST Position Drill - 2 Flutes
Point Angle: 90° / 120°
Size Range: 3mm~20mm
Coating: Uncoated / ZrN-A -
PDST Long Shank Position Drill - 2 Flutes
Point Angle: 90° / 120°
Size Range: 4mm~20mm
Coating: Uncoated / ZrN-A -
-
REC Carbide Edge Reamer - 6 & 8 Flutes
Diameter：8.5mm~16mm
Coating：uncoated
Flutes：6 flutes & 8 flutes -
IPVE Carbide Square End Mill for Stainless Steel
Type : Unequal Flute Spacing & Helix Design - Anti-Vibration
Coating: ALTIBN
Diameter: 1/4", 5/16", 3/8", 1/2", 5/8" -
IAP Single Flute Aluminum End Mill (O flute)
600Nano End Mills General Application, Diameter：1/4", Coating：ZrN
-
IAE5 2Flutes End Mill for Aluminum Application
600Nano End Mills General Application, Diameter：1/4"~5/8", Coating：ZrN
-
IPVR1T Carbide Corner Radius End Mill for Titanium
Type : Unequal Flute Spacing & Helix Design - Anti-Vibration
Coating: ALTIBN
Diameter: 1/4", 5/16", 3/8", 1/2", 5/8" -
IAUE High Feed U-Type Aluminum End Mill- 3 Flutes
600Nano End Mills General Application, Diameter：1/8"~5/8", Coating：uncoated
-
ISE Square End Mill - 2 Flutes
600Nano End Mills General Application, Diameter：1/16"~5/8", Coating：ALTIBN
-
ISE Square End Mill - 4 Flutes
600Nano End Mills General Application, Diameter：1/16"~5/8", Coating：ALTIBN
-
ISB Ball Nose End Mill - 2 Flutes
600Nano End Mills General Application, Diameter：1/16"~5/8", Coating：ALTIBN
-
INTA Roughing End Mill - 4 Flutes
Type : Square
Coating: ZrN-A
Diameter: 1/4", 5/16", 3/8", 1/2", 5/8" -
ITBTA Taper Ball Nose End Mill - 2 Flutes
Type : Taper Ball Nose
Coating: nACo
Diameter: R0.25, R0.5, R1 -
General Series for Non-Ferrous
Type: Square, Roughing, Ball Nose, Long Neck Ball Nose
Coating：TB (DLC) Coating -
SUS+ Series - Anti-Vibration
Working Materials: SUS 303/314/304
Coating: ZrN-A
Diameter：3mm~20mm -
-
400PLUS - Wear resistance, with ZrN-S, nACRo Coating
Working Materials: Stainless steel 316/316L/430/17-4, Titanium alloy, Carbon Steel, Alloy Steel, Pre-hardened steel under 60HRC.
Coating: ALTIBN, nACRo, ZrN-S
Cooling Way: Water coolant -
600PLUS - Economy Series, with ZrN-A coating
Working Materials: Stainless steel 303/314/304, Carbon Steel, Alloy Steel, Pre-hardened steel under 45HRC.
Coating: ZrN-A
Cooling Way: Air Cutting, Dry Cutting -
High Efficiency End Mill for Compound Lathe - 3 Flutes
Diameter: 5-10mm
Unequal Helix 38°-40°-42°
Good at Steel, Stainless Steel, and Titanium, etc.
3 Coating Options: ALTIBN, TiSiN, ZrN-A -
High Efficiency End Mill for Compound Lathe - 4 Flutes
Diameter: 5-10mm
Unequal Helix 38°-40°-42°
Good at Steel, Stainless Steel, and Titanium, etc.
3 Coating Options: ALTIBN, TiSiN, ZrN-A -
High Efficiency End Mill for Compound Lathe - 5 Flutes
Diameter: 5-10mm
Helix 38° & Unequal Flute Spacing
Good at Steel, Stainless Steel, and Titanium, etc.
3 Coating Options: ALTIBN, TiSiN, ZrN-A -
High Efficiency End Mill for Compound Lathe - 6 Flutes
Diameter: 6-12mm
Unequal Helix 40°-42°
Good at Steel with Fine Surface
3 Coating Options: ALTIBN, TiSiN, ZrN-A -
Helix 30° End Mill for Compound Lathe - 2 Flutes
Diameter: 1-16mm
Helix 30°, General Application
3 Coating Options: ALTIBN, TiSiN, ZrN-A -
Helix 30° End Mill for Compound Lathe - 3 Flutes
Diameter: 1-16mm
Helix 30°, General Application
3 Coating Options: ALTIBN, TiSiN, ZrN-A -
Helix 30° End Mill for Compound Lathe - 4 Flutes
Diameter: 1-16mm
Helix 30°, General Application
3 Coating Options: ALTIBN, TiSiN, ZrN-A -
Aluminum End Mill for Compound Lathe - 2 Flutes
Diameter: 2-16mm
Helix 45°, Aluminum Application
2 Coating Options: Uncoated and TB coating (DLC) -
Aluminum End Mill for Compound Lathe - 3 Flutes
Diameter: 2-16mm
Helix 45°, Aluminum Application
2 Coating Options: Uncoated and TB coating (DLC) -
3.5KW Induction Machine and Water Cooling Station
3.5KW Induction Machine and Water Cooling Station
-
Power Tips: Replaceable End Mills Head
Type: Square, Ball Nose, Corner Radius, Dovetail Cutter, Corner Rounding, Double Chamfer, Keyseat
Coating: nACRo, nACo, ALTIBN -
SNC Carbide Drill For Titanium 5xD 8xD
Point Angle: 140°
Drill Depth: 5xD / 8xD
Size Range: 3mm~14mm / 3mm~12mm -
SN Carbide Drill For Titanium 3xD 5xD
Point Angle: 135°
Drill Depth: 3xD / 5xD
Size Range: 3mm~16mm / 3mm~14mm -
PKC High Performance Carbide Drill 5xD 8xD
Point Angle: 140°
Drill Depth: 5xD / 8xD
Size Range: 3mm~14mm / 3mm~12mm -
-
Titanium Nickel Alloy
Working Materials: Ti6Al4V
Coating: ALTIBN, ZrN-S, nACRo(Recommend)
Type: Square, Ball Nose, Corner Radius -
AeroSpace High Speed Series for Aluminum
Type: Square, Ball Nose, Corner Radius
Diameter：2mm~20mm -
